4. Camera
119
Applicable modes:
Works when focusing manually in the Manual Focus Mode.
From the Recording screen > [ ] > [Custom] > [Peaking].
Applicable modes:
From the Recording screen > [ ] > [Custom] > [Peaking detect Level].
Highlighting in-focus portions ([Peaking])
[ON] In-focus portions are highlighted with colour.
[OFF] In-focus portions are not highlighted.
Sets the detection level of the area in focus ([Peaking detect Level])
[Detect Level
High]
When [Detect Level High] is set, portions to be highlighted are reduced, allowing you to
achieve a more precise focus.
≥ Sets the highlighting colour used for [Peaking].
[ ] ([Light blue])/[ ] ([Yellow])/[ ] ([Green])
[Detect Level
Low]
≥ Sets the highlighting colour used for [Peaking].
[ ] ([Blue])/[ ] ([Orange])/[ ] ([White])
≥ The detection level setting does not affect the focus range.
≥ Sets the Peaking to display the [ ] ([Detect Level High]) or [ ] ([Detect Level Low]) in the MF
adjustment screen.
≥ Since portions with clear outlines on the screen are highlighted as in-focus portions, portions to be highlighted
vary depending on the recording conditions.
≥ The colour used for highlighting does not affect recorded images.
To Next Page
Loading...
