4. Camera
94
∫ [Setup]
The unit can be configured for easier use, such as changing the save destination of images.
[Location Logging]
Sets whether to append location information of the recording location to
the picture or motion picture during recording.
P122
[Store in] Sets the storage location of recorded images. P122
[Auto Backup]
Sets whether to save a backup copy of the recorded image on the
Google drive or not at the end of the camera function.
P122
[Auto OFF] Sets the time until the camera function ends if there is no operation. P122
[High Brightness
Mode]
Sets whether to use [High Brightness Mode] or not.
P122
[Preview Mode] Set the frame rate of the recording screen. P122
[Beep] Sets whether to emit the beep or not. P123
[Shutter] Sets whether to emit the shutter sound or not. P123
[No.Reset] Returns the image file number to 0001. P123
[Reset] The recording or setup/custom settings are reset to the default. P123
To Next Page
Loading...
