Basic
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in the [Rec]
menu.
_ Slide the selector
[Rec]/[Playback]
switch to [It'll], and then press
[MODE].
O
_ Press &l,l<lll_ to select
[Normal Picture],
and then press [MENU/SET].
_Aim the AF area at the point you want to focus on.
_ Press the shutter button to focus
halfway
and then press it fully to take the picture.
(_ ISO sensitivity
(_ Aperture value
(_ Shutter speed
• Aperture value and shutter speed is displayed in red
when correct exposure is not achieved. (Exclude when
using a flash)
,&
T
When the Jitter alert [l(g_))] appears, use [Stabilizer] (P82), a tripod or the Self-timer (P52).
• Shutter speed will be slower particularly in the following cases. Keep the camera still from the
moment the shutter button is pressed until the picture appears on the screen. We recommend
using a tripod.
- In [Panorama Assist], [Night Portrait], [Night Scenery], [Party], [Candle Light], [Starry Sky],
[Fireworks] or [High Dynamic] in [Scene Mode]
- 25-
To Next Page
Loading...
