Recording
This takes pictures of a baby with a healthy complexion. When you use the flash, the light
from it is weaker than usual.
It is possible to set different birthdays and names for [Baby1] and [Baby2]. You can select
to have these appear at the time of playback, or have them stamped on the recorded
image using [Text Stamp] (P90).
• Birthday/Name setting
1 Press Air to select [Age] or [Name] and then press [MENU/SET].
2 Press A/V to select [SET] and then press [MENU/SET].
3 Enter the birthday or name.
Birthday:
,_/1_: Select the items (year/month/day).
A/V : Setting.
[MENU/SET]: Set.
Name: For details on how to enter characters, refer to "Entering Text" on P83.
• When the birthday or name is set, [Age] or [Name] is automatically set to [ON].
• If [ON] is selected when the birthday or name has not been registered, the setting screen
appears automatically.
4. Press • to select [Exit] and then press [MENU/SET] to finish.
• To cancel [Age] and [Name]
Select the [OFF] setting in step 2.
• The age and name can be printed out using the "PHOTOfunSTUDIO" bundled software on the
CD-ROM (supplied).
• If [Age] or [Name] is set to [OFF] even when the birthday or name has been set, the age or
name will not be displayed.
• Shutter speed may slow down up to 1 second.
-&l -
To Next Page
Loading...
