Recording
It is possible to enter babies' and pets' names and the names of travel destinations when
recording. (Only alphabetical characters and symbols can be entered.)
Display the entry screen.
• You can display the entry screen via the following operations.
-[Name] of [Babyl]/[Baby2] or [Pet] (P61) in Scene Mode.
-[Location] in [Travel Date] (P68).
Press AI,I,II_ to select text and then press
[MENU/SET] to register.
• Move the cursor to [_?a] and then press [MENU/SET] to switch
text between [A] (capitals), [a] (lower case), [1] (numbers) and
[&] (special characters).
• The entry cursor position can be moved left and right with the
zoom lever.
• To enter the same character again, rotate the zoom lever towards [o,,] (T) to move the
cursor.
• The following operations can be performed by moving the cursor to the item and
pressing [MENU/SET]:
-[_]: Enter a blank
-[Delete]: Delete a character
-[_t]: Move the entry position cursor to the left
-[_]: Move the entry position cursor to the right
• A maximum of 30 characters can be entered.
Press &ITI_II_ to move the cursor to [Set] and then press
[MENU/SET] to end text input.
• Text can be scrolled if all of the entered text does not fit on the screen,
- 83 -
To Next Page
Loading...
