Connecting to other equipment
You can transfer the pictures in the camera to a PC by connecting the camera and the PC.
• Some PCs can read directly from the card removed from the camera. For details, refer to the
operating instructions of your PC.
• If the computer being used does not support SDXC Memory Cards, a message
prompting you to format may appear. (Doing so will cause recorded images to be erased
so do not choose to format.)
If the card is not recognized, please refer to the below support site.
http:llpanasonic.netlavclsdcardlinformationlSDXC.html
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
_) USB connection cable (supplied)
• Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause a malfunction.)
(_) Align the marks, and insert.
• Use a battery with sufficient battery power or the AC adaptor (optional) and DC coupler
(optional). If the remaining battery power becomes low while the camera and the PC are
communicating, the alarm beeps.
Refer to "Disconnecting the USB connection cable safely" (PIOI) before disconnecting the
USB connection cable. Otherwise, data may be destroyed.
- 99-
To Next Page
Loading...
Need help?
General
