EasyManuals Logo

Panasonic LUMIX DMC-FS12 User Manual

Panasonic LUMIX DMC-FS12
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
Advanced (Recording pictures)
- 90 -
For details on [REC] mode menu settings, refer to P21.
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Applicable modes:
ñ· ¿
¢ The burst speed is constant regardless of the transfer speed of the card.
The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
Note
When the Burst mode setting is set to Unlimited
The burst speed becomes slower halfway. The exact timing of this depends on the type of
card, the picture size and the quality.
You can take pictures until the capacity of the built-in memory or the card is full.
The focus is fixed when the first picture is taken.
When the burst speed is set to [
˜], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to
[
ò], they are adjusted each time you take a picture.
When the self-timer is used, the number of recordable pictures in Burst mode is fixed to 3.
If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
The burst speed (pictures/second) may become slower depending on the recording
environment such as in dark places, if the ISO sensitivity is high etc.
Burst mode is not canceled when the camera is switched off.
If you take pictures in Burst mode with the built-in memory, it will take time to write the picture
data.
•[Œ] is set for the flash when burst is set.
Auto bracket is canceled when burst is set.
Burst cannot be used in [TRANSFORM], [HI-SPEED BURST], [FLASH BURST],
[STARRY SKY], [FILM GRAIN] or [PHOTO FRAME] in Scene mode.
[BURST]
[OFF] ˜ ò
Burst speed (pictures/
second)
1.8
¢
(DMC-FS12)
2.3
¢
(DMC-FS62)
approx. 1.7
Number of
recordable
pictures
A
max. 3
Depends on the
remaining capacity of the
built-in memory/card.
max. 5

Table of Contents

Other manuals for Panasonic LUMIX DMC-FS12

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic LUMIX DMC-FS12 and is the answer not in the manual?

Panasonic LUMIX DMC-FS12 Specifications

General IconGeneral
BrandPanasonic
ModelLUMIX DMC-FS12
CategoryDigital Camera
LanguageEnglish

Related product manuals