Advanced (Playback)
- 100 -
[PLAYBACK] mode: ¸
Using the [PLAYBACK] mode menu
You can use various functions in playback mode to rotate pictures, set protection for them
etc.
• With [TEXT STAMP], [RESIZE] or [TRIMMING], a new edited picture is created. A new picture
cannot be created if there is no free space on the built-in memory or the card so we
recommend checking that there is free space and then editing the picture.
You can display pictures by recording date.
Note
• The recording date of the picture selected in the playback screen becomes the date selected
when the calendar screen is first displayed.
• If there are multiple pictures with the same recording date, the first picture recorded on that day
is displayed.
• You can display the calendar between January 2000 and December 2099.
• If the date is not set in the camera, the recording date is set as the 1st January, 2009.
• If you take pictures after setting the travel destination in [WORLD TIME], the pictures are
displayed by the dates at the travel destination in calendar playback.
[CALENDAR]
Select [CALENDAR] on the [PLAYBACK] mode menu. (P21)
• You can also rotate the zoom lever several times towards [L] (W) to display the
calendar screen. (P42)
Press 3/4/2/1 to select the date to be played
back.
3/4: Select the month
2/1: Select the date
• If there were no pictures recorded during a month, the month is
not displayed.
Press [MENU/SET] to display the pictures that were
recorded on the selected date.
• Press [‚] to return to the calendar screen.
Press 3/4/2/1 to select a picture and then press [MENU/SET].
• The picture that was selected will appear.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
