Connecting to other equipment
92
VQT0Y69
[Windows]
The drive appears in the [My Computer]
folder.
• If you are connecting the camera to a PC
for the first time, the required driver is
installed automatically so that the camera
can be recognized by “Windows Plug and
Play”. The drive then appears on the
[My Computer] folder.
[Macintosh]
The drive is displayed on the screen.
• The drive is displayed as [LUMIX] when
you connect the camera with no card
inserted.
• The drive is displayed as [NO_NAME] or
[Untitled] when you connect the camera
with a card inserted.
∫
About motion picture playback on a PC
Use the software “QuickTime”
(for Windows 2000/XP) in the CD-ROM
(supplied) to play back motion pictures
recorded on this camera on a PC.
• If you use “Windows 98/98SE/Me”,
download “QuickTime6.5.2 for PC” from
the following site, and install it.
http://www.apple.com/support/quicktime/
• This software is installed as standard on a
“Macintosh OS”.
∫ Folder Composition
Folders are displayed as shown in the
following illustration.
1 Folder number
2 File number
3 JPG: pictures
MOV: motion pictures
The items in each folder are as follows.
• The data for up to 999 pictures recorded
by the camera can be included in 1 folder.
If the number of pictures exceeds 999,
another folder is created.
• To reset the file number or the folder
number, select [NO.RESET] in the
[SETUP] menu. (P22)
[DCIM] Folders from [100_PANA] to
[999_PANA]
[100_PANA]
to
[999_PANA]
Pictures/motion pictures
[MISC] Files on which the DPOF
print settings are recorded
100_PANA
101_PANA
999_PANA
DCIM
MISC
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
1
23
≥SD Memory Card
≥
SDHC Memory Card
≥MultiMediaCard
≥Built-in memory
(DMC-FX3)
VQT0Y69ENG.book 92 ページ ２００６年６月３０日 金曜日 午前１１時７分
To Next Page
Loading...
