Preparation
19
VQT1C14
• Power save mode is not activated in the
following cases.
– When using the AC adaptor
(DMW-AC5PP; optional)
– When connecting to a PC or a printer
– When recording or playing back motion
pictures
– During a slide show (P70)
[ECONOMY]
(Turning off the LCD monitor
automatically.)
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
The brightness of the LCD monitor is
reduced, and the LCD monitor is turned off
automatically while the camera is not in
use, to save battery life when recording.
[LEVEL 1]: The LCD monitor turns off if the
camera is not operated for
about 15 seconds in recording
mode.
[LEVEL 2]: The LCD monitor turns off if the
camera is not operated for
about 15 seconds in recording
mode or for about 5 seconds
after taking a picture.
[OFF]: Economy mode cannot be
activated.
• The LCD monitor is turned off while the
flash is being charged.
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn on the LCD monitor again.
• Power save mode is fixed to [2MIN.].
[However, power save mode is not
activated when using the AC adaptor
(DMW-AC5PP; optional).]
• The brightness of the LCD monitor is not
reduced in Power LCD mode and high
angle mode.
• Economy mode is not activated in the
following cases.
– In simple mode [ ]
– When using the AC adaptor
(DMW-AC5PP; optional)
– While a menu screen is displayed
– While the self-timer is set
– While recording motion pictures
[WORLD TIME] (P56)
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Set the time in your home area and travel
destination.
[]:Your home area
[]:Travel destination area
[MONITOR]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Adjust the brightness of the LCD monitor in
7 steps.
[TRAVEL DATE] (P54)
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
Set the departure date and the return date
of the vacation.
[SET], [OFF]
[BEEP]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
This allows you to set the beep.
[BEEP LEVEL]
[]:No operation sound
[]:Soft operation sound
[]:Loud operation sound
[BEEP TONE]: / /
[SHUTTER]
Press [ ] to display the [SETUP] menu
and select the item to set. (P17)
This allows you to set the shutter sound.
[SHUTTER VOL.]
[]:No shutter sound
[]:Soft shutter sound
[]:Loud shutter sound
[SHUTTER TONE]: / /
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
MENU
SET
1 2 3
MENU
SET
MENU
SET
1 2 3
VQT1C14ENG.book 19 ページ ２００６年１２月４日 月曜日 午後１１時０分
To Next Page
Loading...
Need help?
General
