Why does my PC stop responding when connecting my Panasonic Digital Camera via USB?
M
Misty McclureAug 14, 2025
Your PC might stop responding when plugging and unplugging the USB connection cable because Simple Viewer is set to start automatically. To resolve this, change the setting to prevent Simple Viewer from starting automatically. Go to [Advanced] >> [Setting...] and set [Automatic acquisition] to [No]. To manually start Simple Viewer, double-click the LUMIX Simple Viewer shortcut on the desktop.
J
John Stewart MDAug 18, 2025
Why is the date not printed on my pictures from Panasonic Digital Camera?
D
Darren CookAug 18, 2025
If the picture was recorded with a digital camera with the clock not set, or if it was recorded with any digital camera other than a Panasonic, its date may not be printed correctly.
V
Vanessa SimonAug 21, 2025
How to remove blank spaces when printing pictures from Panasonic Lumix DMC-FX100 Digital Camera?
P
Patricia OrrAug 21, 2025
To avoid blank spaces, set [Trimming] to [Yes] when printing. If trimming is not applied, the whole picture is printed, but if the aspect ratio of the paper is different from that of the image, blank spaces will appear.
T
Tyler FloresAug 25, 2025
What to do if pictures are displayed incorrectly on Panasonic Digital Camera after adding them to PC?
B
Bonnie KaneAug 25, 2025
If pictures display incorrectly after you've added them to your PC, it may be due to changes in folder or file names. To fix this, register the pictures using the [Add pictures] function in Simple Viewer.
A
Austin CunninghamAug 28, 2025
How to start Simple Viewer for Panasonic Lumix DMC-FX100 Digital Camera?
R
russell53Aug 28, 2025
If Simple Viewer doesn't start automatically, double-click the LUMIX Simple Viewer shortcut on your desktop. If there is no shortcut, go to [start] >> [All programs] >> [Panasonic] >> [LUMIX Simple Viewer] >> [LUMIX Simple Viewer]. Alternatively, you can enable automatic start by clicking [Advanced] >> [Setting...] and setting [Automatic acquisition] to [Yes]. If you don't want it to start automatically, set it to [No].
L
Lisa BautistaAug 31, 2025
Why are two identical pictures displayed when acquiring motion pictures from Panasonic Lumix DMC-FX100 Digital Camera?
W
whitewhitneyAug 31, 2025
When you record motion pictures, the camera saves them as both motion pictures (MOV format) and still pictures (JPEG format). This also occurs when taking still pictures with audio, or files that are TIFF or RAW format. To delete these related pictures in Simple Viewer, delete each picture individually.
K
Kristin WatsonSep 3, 2025
What to do if no pictures can be printed from Panasonic Lumix DMC-FX100?
B
Brandi HernandezSep 4, 2025
Check that the printer is set up correctly. Refer to the operating instructions for your printer for setup guidance.
To Next Page
General
