Advanced (Playback)
86
VQT1F52
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P76)
You can set protection for pictures you do
not want to be deleted by mistake.
Press 3/4 to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
∫ Single setting
1 Press 2/1 to select the picture
and then press 4 to SET/
CANCEL.
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P84 to 85)
• If you press [MENU/SET] while canceling
protection, the canceling will stop halfway.
• The protect setting may not be effective
on other equipment.
• If you want to delete protected pictures,
cancel their protection.
• Even if you protect pictures in the built-in
memory or a card, they will be deleted if
the built-in memory or the card is
formatted.
• Even if you do not protect pictures on an
SD Memory Card or an SDHC Memory
Card, they cannot be deleted when the
card’s Write-Protect switch B is set to
[LOCK].
• The following functions cannot be used
with protected pictures.
–[ROTATE]
– [AUDIO DUB.]
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P76)
You can add the audio after taking a
picture.
1 Press 2/1 to select the picture
and then press 4 to start audio
recording.
[PROTECT]
Preventing accidental erasure of
pictures
[SET]
The protect icon [ ] A
appears.
[CANCEL]
The protect icon [ ] A
disappears.
MENU
/
SET
MENU
/
SET
A
[AUDIO DUB.]
Adding audio after taking pictures
2
MENU
/
SET
DMC-FX100ENG.book 86 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
Need help?
General
