Advanced (Recording pictures)
65
VQT1F52
Press [ ] to display the [REC] mode
menu and select the item to set. (P59)
Select the mode that matches the
recording conditions and the composition.
∫ About [ ] or [ ]
• You can focus on the subject more quickly
than other AF modes.
• The picture may stop moving for a
moment before being brought into focus
when you press the shutter button
halfway. This is not a malfunction.
• The AF area displayed is bigger than
usual when taking pictures in dark places
or when using the digital zoom.
• The camera is focusing on all the AF
areas when multiple AF areas (max.
9 areas) light at the same time.
The focus position is not predetermined. It
is set to a position automatically
determined by the camera at the time of
focusing. If you want to determine the
focus position to take pictures, switch the
AF mode to [ ], [ ] or [ ].
• If the AF mode is set to [ ] or [ ],
the AF area is not displayed until the
picture is brought into focus.
• Switch the AF mode to [ ] or [ ] if it
is difficult to focus using [ ].
• The AF mode cannot be set in simple
mode [ ], [SELF PORTRAIT] or
[FIREWORKS] in scene mode.
[AF MODE]
Setting the focus method
9-area-focusing:
The camera focuses on
any of 9 focus areas.
This is effective when
the subject is not in the
center of the screen.
3-area-focusing (High speed):
The camera quickly
focuses on any of
3 focus areas points –
left, right or center.
This is effective when
the subject is not in the center of the
screen.
1-area-focusing (High speed):
The camera quickly
focuses on the subject
in the AF area on the
center of the screen.
1-area-focusing:
The camera focuses on
the subject in the AF
area on the center of
the screen.
Spot-focusing:
The camera focuses on
a limited narrow area in
the screen.
MENU
/
SET
1/60F5.6
DMC-FX100ENG.book 65 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
