Advanced (Playback)
74
VQT1F52
Creating still pictures
from a motion picture
You can create a single still picture (with 1
screen or 9 screens) from a recorded
motion picture. This is effective in moving
scenes when you want to look carefully at
the movement of a sportsperson etc.
1 Press 2/1 to select a picture
with a motion picture icon [ ]/
[]/[]/[]/[]/
[ ]/[ ] and then press 4
to play back.
2 Press 3 to pause motion picture
playback.
• Press 3 again to return to motion
picture playback.
• Press 2/1 while paused to move
forward frame-by-frame.
• If you press the shutter button, you can
save the displayed still pictures as one
single picture. (Perform step
3)
∫ Saving a single still picture with
9 screens from the motion picture
• Rotate the zoom lever towards [ ]
[W] to display the 9 screens playback
screen.
• Rotate the zoom lever further towards
[ ] (W) to switch to [ ]/[ ]/[ ]
(A).
When a motion picture with [ ],
[ ]or [ ] was selected
The recorded motion picture is created
using 30 still picture frames per second.
[]All the frames of the recorded
motion picture are displayed as
still pictures (1/30th second
intervals)
[]1 frame is skipped/every second
frame is displayed as a still picture
(1/15th second intervals)
[]2 frames are skipped/every third
frame is displayed as a still picture
(1/10th second intervals)
[]5 frames are skipped/every sixth
frame is displayed as a still picture
(1/5th second intervals)
A
DMC-FX100ENG.book 74 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
