Advanced (Playback)
71
VQT1F52
Displaying Pictures by
Recording Date
(Calendar Playback)
You can display pictures by recording date
using the calendar playback function.
1 Rotate the zoom lever several
times towards [ ] (W) to display
the calendar screen.
• The recording date of the picture
selected in the playback screen
becomes the date selected when the
calendar screen is first displayed.
• If there are multiple pictures with the
same recording date, the first picture
recorded on that day is displayed.
2 Press 3/4/2/1 to select the
date to be played back.
3/4: Select the month
2/1: Select the date
• If there were no pictures recorded
during a month, the month is not
displayed.
3 Press [MENU/SET] to display the
pictures that were recorded on
the selected date.
• Rotate the zoom lever towards [ ]
[W] to return to the calendar screen.
4 Press 3/4/2/1 to select a
picture and then press
[MENU/SET].
• The picture that was selected will
appear.
∫ To return to the 1 screen playback
screen
After the calendar screen is displayed,
rotate the zoom lever towards [ ] [T] to
display 25 screens, 9 screens and the 1
screen.
• The pictures are displayed without being
rotated even if you set [ROTATE DISP.] to
[ON]. (P81)
• You can display the calendar between
January 2000 and December 2099.
• If the recording date of the picture
selected in 25 screen multi playback is not
between January 2000 and December
2099, the camera displays it in the oldest
recording date in the calendar.
• Pictures edited on a PC will be displayed
with dates different from the actual
recording dates.
• If the date is not set in the camera, the
recording date is set as January 1st,
2007.
• If you take pictures after setting the travel
destination in [WORLD TIME], the
pictures are displayed by the dates at the
travel destination in calendar playback.
MENU
/
SET
DMC-FX100ENG.book 71 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
Need help?
General
