Advanced (Playback)
90
VQT1F52
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P76)
You can copy recorded picture data from
the built-in memory to a card or vice versa.
1 Press 3/4 to select the copy
destination and then press
[MENU/SET].
•:
All the picture data in the built-in
memory are copied onto the card at
one time. > step
3.
•:
One picture at a time is copied from the
card to the built-in memory. > step
2.
2 Press 2/1 to select the picture
and then press 4.
(Only when selecting [ ])
3 Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
pictures are copied from the built-in
memory to a card.)
• The message [COPY THIS PICTURE
TO BUILT-IN MEMORY?] appears when
you copy pictures from the card to the
built-in memory.
• If you press [MENU/SET] while copying
pictures from the built-in memory to the
card, the copying will stop halfway.
• Do not turn the camera off or perform
any other operations before copying is
finished. The data on the built-in
memory or the card may be damaged
or lost.
4 Press [MENU/SET] several times
to close the menu.
• If you copy from the built-in memory to
a card, all the pictures are copied and
then the screen automatically returns to
the playback screen.
• If you copy picture data from the built-in
memory to a card which does not have
sufficient free space, the picture data will
only be copied halfway. We recommend
using a card which has more free space
than the built-in memory (about 27 MB).
•I
f a picture exists with the same name
(folder number/file number) as the picture to
be copied in the copy destination when
[
] is selected, a new folder is
created and the picture is copied.
If a picture exists with the same name
(folder number/file number) as the picture
to be copied in the copy destination when
[
] is selected, that picture is not
copied.
• It may take time to copy the picture data.
• Only pictures recorded with a Panasonic
digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a
Panasonic digital camera, you may not be
able to copy them if they were edited with
a PC.)
• DPOF settings on the original picture data
will not be copied. Set the DPOF settings
again after copying is finished. (P84)
[COPY]
Copying the picture data
MENU
/
SET
MENU
/
SET
MENU
/
SET
DMC-FX100ENG.book 90 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
