Advanced (Recording pictures)
54
VQT1F52
Motion Picture Mode
1 Press the shutter button halfway
to focus and then press it fully to
start recording.
A Audio recording
• The available recording time B is
displayed on the top right and the
elapsed recording time C is displayed
on the bottom right of the screen.
• When the subject is focused, the focus
indication lights.
• The focus, zoom and aperture value are
fixed to the setting when recording
starts (the first frame).
• The audio is also recorded
simultaneously from the built-in
microphone on this unit. (Motion
pictures cannot be recorded without
audio.)
• When using the stabilizer function, it is
fixed to [MODE1].
2 Press the shutter button fully to
stop recording.
• If the built-in memory or the card
becomes full in the middle of recording,
the camera stops recording
automatically.
∫ Changing the settings for the aspect
ratio and the picture quality
1 Press [MENU/SET].
2 Press 3/4 to select [ASPECT
RATIO] and then press 1.
3 Press 3/4 to select the item and
then press [MENU/SET].
4 Press 3/4 to select [PICT.MODE]
and then press 1.
5 Press 3/4 to select the item and
then press [MENU/SET].
If you selected [ ] on the screen
shown in step
2
If you selected [ ] on the screen
shown in step
2
• fps “frames per second”; This refers to
the number of frames used in 1 second.
• You can record smoother motion
pictures with “30 fps”.
3s
R50s
Item Picture size fps
[30fpsVGA]
640k480 pixels
30
[10fpsVGA]
10
[30fpsQVGA]
320k240 pixels
30
[10fpsQVGA]
10
Item Picture size fps
[30fps16:9L]
848k480 pixels
30
[10fps16:9L]
10
[15fps16:9H]
1280
k
720 pixels
15
DMC-FX100ENG.book 54 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
Need help?
General
