Advanced (Recording pictures)
66
VQT1F52
Press [ ] to display the [REC] mode
menu and select the item to set. (P59)
∫ About the jitter/movement detection
demonstration screen
Press 1 to display [JITTER, SUBJ. MOVE
DEMO.] when the [STABILIZER] screen is
displayed. (Pictures cannot be recorded
when the [JITTER, SUBJ. MOVE DEMO.]
screen appears.)
Press 1 again to finish this mode.
A Jitter detection demonstration
B Movement detection demonstration
• The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
• We recommend using a bright subject
with high contrast for the subject
movement demonstration.
• The jitter/movement detection
demonstration screen is an
approximation.
• The camera also detects the movement of
the subject when automatically setting the
ISO sensitivity in intelligent ISO sensitivity
mode [ ] and [SPORTS], [BABY1]/
[BABY2] and [PET] in scene mode.
• The stabilizer function may not be
effective in the following cases.
– When there is a lot of jitter.
– When the zoom magnification is high.
– In digital zoom range.
– When taking pictures while following a
moving subject.
– When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
• The setting is fixed to [MODE2] in simple
mode [ ] and [SELF PORTRAIT] in
scene mode and fixed to [OFF] in
[STARRY SKY] in scene mode.
• In motion picture mode [ ], [MODE2]
cannot be set.
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
MENU
/
SET
A
B
DMC-FX100ENG.book 66 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
