Basic
28
VQT1F52
∫ Picture size and maximum zoom
magnification
(±: Available, —: Not available)
∫ Extended optical zoom mechanism
When you set the picture size to [ ]
(3M EZ) (3 million pixels), the 12M
(12.2 million pixels) CCD area is cropped to
the center 3M (3 million pixels) area,
allowing a picture with a higher zoom effect.
• The optical zoom is set to Wide (1k)
when the camera is turned on.
• If you use the zoom function after focusing
on the subject, focus on the subject again.
• The lens barrel extends or retracts
according to the zoom position. Take care
not to interrupt the motion of the lens
barrel while the zoom lever is rotated.
• In motion picture mode [ ], the zoom
magnification is fixed to the value set at
the start of recording.
• “EZ” is an abbreviation of
“Extended optical Zoom”.
• If you set a picture size that activates the
extended optical zoom, the extended
optical zoom icon [ ] is displayed on the
screen when you use the zoom function.
• The zoom will stop moving for an instant
near [W] (1k) when the extended optical
zoom is used. This is not a malfunction.
• The indicated zoom magnification is an
approximation.
• In motion picture mode [ ] and
[HIGH SENS.] or [HI-SPEED BURST] in
scene mode, the extended optical zoom
does not work.
You can zoom at high speed from Wide to
Tele by pressing [E.ZOOM].
The zoom magnification differs depending
on the picture size that is set.
Aspect
ratio
(P62)
Picture size
(P26, 63)
Maximum
zoom magnifi-
cation (Tele)
Extended
optical
zoom
/(12M)
3.6k —(10.5M)
(9M)
(8M EZ)
4.4k
± (7M EZ)
(6M EZ)
(5M EZ)
5.6k
±
(4.5M EZ)
(3.5M EZ)
(3M EZ)
(2M EZ)
/
(0.3M EZ)
7k
±
/
(2.5M EZ)
(2M EZ)
Using the Easy zoom
DMC-FX100ENG.book 28 ページ 2007年5月16日 水曜日 午後3時22分