Basic
29
VQT1F52
∫ When the picture size is set to the
highest setting for each aspect ratio
The picture size becomes smaller
temporarily and the extended optical zoom
can be used.
e.g.: Setting to [ ] (12M)
1 Press [E.ZOOM] once.
2 Press [E.ZOOM] twice.
3 Press [E.ZOOM] three times.
1 Optical zoom
2 Extended optical zoom
• The picture size within the Extended
optical zoom range changes to the
following. The color of the zoom bar and
the picture size displayed on the screen
change color at this time.
• If you press [E.ZOOM] three times, the
zoom position returns to Wide and the
picture size returns to the original size.
Also, if the zoom position returns to the
optical zoom range by the zoom lever, the
picture size returns to the original size.
∫ When the picture size is not set to the
highest setting for each aspect ratio
e.g.: Setting to [ ] (3M EZ)
1 Press [E.ZOOM] once.
2 Press [E.ZOOM] twice.
1 Extended optical zoom
• Press [E.ZOOM] firmly until the zoom
function is activated.
• The easy zoom is also activated if
[E.ZOOM] is pressed when the zoom
position is not Wide.
• You can further extend the zoom to the
digital zoom range when [D.ZOOM] (P30)
is set to [ON].
• In [ ENLARGE] in simple mode [ ],
[HIGH SENS.] or [HI-SPEED BURST] in
scene mode and motion picture mode
[ ], the zoom becomes up to 3.6k
optical zoom.
• The indicated zoom magnification is an
approximation.
Aspect ratio Picture size
>
>
>
T
W
T
W
T
W
2
1
1
2
3
T
W
T
W
1
1
2
DMC-FX100ENG.book 29 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
Need help?
General
