Advanced (Playback)
75
VQT1F52
When a motion picture with [ ],
[ ]or [ ] was selected
The recorded motion picture is created
using 10 still picture frames per second.
• You can move forward frame-by-frame
by pressing 3/4/2/1.
3/4: Move forward/backward 3 frames
at a time.
2/1: Move forward/backward
1 frame at a time.
When a motion picture with [ ] was
selected
The recorded motion picture is created
using 15 still picture frames per second.
3 Press the shutter button.
• The message [SAVE THESE NINE
PICTURES AS ONE SINGLE
PICTURE ?] appears. Also, the
message [SAVE AS A SINGLE
PICTURE ?] appears if you saved the
picture in step
2.
4 Press 3 to select [YES] and then
press [MENU/SET].
• The nine pictures are saved as one
single picture.
∫ To stop using the 9 screens playback
screen
After the 9 screens playback screen is
displayed, rotate the zoom lever several
times towards [ ] (T) or press [MENU/
SET]. The screen returns to the paused
motion picture playback screen.
∫ Picture size
• [QUALITY] is fixed to [ ].
• You may not be able to save still pictures
from a motion picture taken on other
equipment.
[]All the frames of the recorded
motion picture are displayed as
still pictures (1/10th second
intervals)
[]1 frame is skipped/every second
frame is displayed as a still picture
(1/5th second intervals)
[]All the frames of the recorded
motion picture are displayed as
still pictures (1/15th second
intervals)
[]2 frames are skipped/ every third
frame is displayed as a still picture
(1/5th second intervals)
Item 1picture 9pictures
[30fpsVGA]
0.3M 2M
[10fpsVGA]
0.3M 2M
[30fpsQVGA]
0.3M 1M
[10fpsQVGA]
0.3M 1M
[30fps16:9L]
2M 2M
[10fps16:9L]
2M 2M
[15fps16:9H]
2M 2M
MENU
/
SET
DMC-FX100ENG.book 75 ページ ２００７年５月１６日 水曜日 午後３時２２分
To Next Page
Loading...
