Recording Menu Settings
73
VQT0S57
[REC] mode menu (Refer to P66 for the setting method.)
∫ High speed AF (H) mode
• When you select 3-area-focusing (High
speed) or 1-area-focusing (High speed),
the auto focus is activated in high speed
and you can focus on the subject more
quickly.
• When you press the shutter button
halfway, a picture may become still for a
moment in the condition before being
focused. However, it is not a malfunction.
If you do not want to make pictures still
during the auto focus, use the AF mode
other than 3-area-focusing (High speed)
mode and 1-area-focusing (High speed)
mode.
• When using the digital zoom or when you
take pictures in dark places, the AF area
is displayed on the center of the screen
with a size wider than usual.
• When multiple AF areas (max. 5 areas)
light at the same time, the camera is
focusing on all the AF areas.
The focus position is not predetermined
because it is set to the position that the
camera automatically determines at the
time of focusing. If you want to determine
the focus position to take pictures, switch
the AF mode to 1-area-focusing mode or
Spot-focusing mode.
• The AF mode cannot be set in simple
mode [ ], [FIREWORKS] (P62) or
[SELF PORTRAIT] (P64) in scene mode.
AF Mode
[AF MODE]
(5-area-focusing):
The camera focuses on
any of 5 focus areas.
You can record a
picture in free
composition without
limiting the position of
the subject.
(3-area-focusing (High speed)):
The camera focuses on
any of the left, center
and right of the screen.
(1-area-focusing (High speed)):
The camera focuses on
the subject in AF area
on the center of the
screen.
(1-area-focusing):
The camera focuses on
the subject in AF area
on the center of the
screen.
(Spot-focusing):
The camera focuses on
the limited and narrow
area in the screen.
1/60F5.0
To Next Page
Loading...
Need help?
General
