Recording pictures (advanced)
81
After installing the external flash
(DMW-FL28; optional), the effective range
will be increased when compared to the
camera’s built in flash.
1 Attach the external flash to the
hot shoe
1 and turn the camera
on.
• Tighten the lock screw 2 of the
external flash firmly.
2 Select [PRESET] or [MANUAL]
and turn the external flash on.
• Close the menu by pressing the shutter
button halfway or the [MENU] button
after finishing the setting.
∫ Switch the external flash setting
External Flash [EXT.FLASH]
SCN1
SCN
2
Icon Setting
or
External flash Forced
ON
or
External flash Forced
OFF
EXIT
MENU
SELECT
REC
4
/
4
MENU
SET
EX.FLASH BURST
EXT.FLASH
PRESET
MANUAL
FZ20-PP.book 81 ページ ２００４年７月６日 火曜日 午後２時６分
To Next Page
Loading...
