Recording pictures (basic)
41
VQT0Q28
∫ Available flash settings by recording mode
The available flash settings depend on the recording mode.
(±: Available, —: Not available)
¢Not available in backlight compensation
∫ The available flash range to take pictures
• The available flash range is an approximation.
• Refer to P33 for the focus range.
• Refer to P73 for the ISO sensitivity.
• If the ISO sensitivity is set to [AUTO], it is automatically adjusted from [ISO100] to
[ISO400] when you use the flash.
• To avoid noise, we recommend decreasing the ISO sensitivity (P73) or setting
[PICT.ADJ.] to [NATURAL]. (P80)
• In motion image mode [ ], [SCENERY], [NIGHT SCENERY] or [FIREWORKS] in
scene mode (P63), the flash setting is fixed to the Forced OFF [ ] even if the flash is
opened.
ISO sensitivity
Available flash control range
Wide Tele
AUTO 30 cm – 4.5 m 30 cm – 3.8 m
ISO80 30 cm – 2 m 30 cm – 1.7 m
ISO100 30 cm – 2.2 m 30 cm – 1.9 m
ISO200 40 cm – 3.1 m 40 cm – 2.6 m
ISO400 60 cm – 4.5 m 60 cm – 3.8 m
VQT0Q28ENG.book 41 ページ ２００５年２月１４日 月曜日 午後５時３１分
To Next Page
Loading...
