19
7.2. When Replacing the Main PCB
After replacing the MAIN PCB, be sure to achieve adjustment.
The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in
“TSN system”, together with Maintenance software.
7.3. Service Position
This Service Position is used for checking and replacing parts. Use the following Extension cables for servicing.
Table S1 Extension Cable List
No. Parts No. Connection Form
1 RFKZ0361 FP9001 (MAIN) - CCD UNIT 28PIN 0.5 FFC
2 VFK1440 FP9002 (MAIN) - TOP OPERATION UNIT 10PIN 0.5 FFC
3 VFK1284 FP9003 (MAIN) - LCD UNIT 24PIN 0.5 FFC
4 VFK1443 FP9004 (MAIN) - EVF UNIT 18PIN 0.5 FFC
5 VFK1953 FP9005 (MAIN) - LENS FPC UNIT 40PIN 0.5 FFC
6 VFK1974 FP9006 (MAIN) - LCD UNIT 4PIN 0.5 FFC
7 VFK1576DSC04 P9001 (MAIN) - SPEAKER 2PIN CABLE
8 RFKZ0359 P9003 (MAIN) - FLASH UNIT 2PIN CABLE
9 VFK1576DC202 P9004 (MAIN) - FLASH UNIT 2PIN CABLE
10 VFK1576DC202 P9005 (MAIN) - FLASH UNIT 2PIN CABLE
11 RFKZ0360 P9006 (MAIN) - P9301 (AF LED/MIC) 5PIN CABLE
12 VFK1576DSC04 P9008 (MAIN) - FLASH UNIT 2PIN CABLE
To Next Page
Loading...
