26
8.3.8. Removal of the CCD Unit
To prevent the CCD unit from catching the dust and dirt, do not
remove the CCD unit except for replacing.
Fig. D10
8.3.9. Removal of the Flash Unit & EVF
Unit
Fig. D11
8.3.10. Removal of the Lens Unit
Fig. D12
NOTE: (When Assembling)
Be sure to confirm the following points when assembling.
• The Screw is tightened enough.
• Assembling conditions are fine. (No distortion, no illegal-
space.)
• No dust and/or dirt on every Lens surfaces.
• LCD image is fine. (No dust and dirt on it, and no gradient
images.)
To Next Page
Loading...
