Panasonic Lumix DMC-FZ7PP - Detailed Component Removal Procedures

22
8.3. Disassembly Procedure
8.3.1. Removal of the Rear Case Unit
Fig. D1
No. Item Fig Removal
1 Rear Case Unit Fig. D1 Card
Battery
4 Screws (A)
2 Screws (B)
Fig. D2 P9001(Connector)
FP9003(Flex)
FP9006(Flex)
Rear Case Unit
2 Main P.C.B. Unit
Battery Frame Unit
Capacitor Holder
Fig. D3 2 Screws (C)
1 Screw (D)
FP9001(Flex)
FP9002(Flex)
FP9004(Flex)
FP9005(Flex)
P9003(Connector)
P9004(Connector)
P9005(Connector)
P9008(Connector)
Main P.C.B. Unit
Fig. D4 2 Screws (E)
3 Solders
2 Locking tabs
P9006(Connector)
Battery Frame Unit
Capacitor Holder
3 LCD Unit Fig. D5 1 Screw (F)
1 Locking tab
LCD Holder
LCD Unit
4 Speaker Fig. D6 3 Screw (G)
SP FIX Plate
Speaker
5 Jack Door Unit Fig. D7 1 Screw (H)
Jack Door Unit
6 AF LED/Mic P.C.B. Fig. D8 2 Locking tabs
AF LED P.C.B. Holder
AF LED/Mic P.C.B.
7 Top Operation Unit Fig. D9 Top Operation Unit
8 CCD Unit Fig. D10 3 Screws (I)
CCD Unit
9 Flash Unit & EVF Unit Fig. D11 Flash Unit & EVF Unit
10 Lens Unit Fig. D12 1 Screw (J)
Lens Unit