17
(ENG) VQT3N48
Attach the lens cap.
While pressing on the lens release button D,
rotate the lens toward the arrow until it stops
and then remove.
• Always attach the body cap to the camera body so that dirt
or dust does not get inside.
• Attach the lens rear cap so that the lens contact point does
not get scratched.
Note
•
It is recommended to attach the lens cap or attach the MC Protector (optional) to protect the
lens surface when carrying.
Detaching a lens from the camera body
DMC-G3K&G3W&G3EB-VQT3N48_eng.book 17 ページ ２０１１年４月２９日 金曜日 午後１２時４８分
To Next Page
Loading...
