VQT3N48 (ENG)
28
Recording Mode:
Taking a Still picture
• Set the drive mode to [ ] by pressing 4().
Selecting the Recording Mode.
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not achieved,
except when set to flash.)
• When the image is correctly focused, the picture
will be taken, since the [FOCUS PRIORITY] is set
initially to [ON].
Press the shutter button fully (push it in
further), and take the picture.
DMC-G3K&G3W&G3EB-VQT3N48_eng.book 28 ページ ２０１１年４月２９日 金曜日 午後１２時４８分
To Next Page
Loading...
