137
4. Picture Quality and Colour Tone Settings
¢ It will operate as [AWB] when recording motion pictures or 4K photos.
3
Press [MENU/SET] to set.
• You can also press the shutter button halfway to set.
• The White Balance is only calculated for subjects within the range of the camera’s flash. (P232)
• In Scene Guide Mode, changing the scene or Recording Mode will return White Balance
settings (including the White Balance fine adjustment setting) back to [AWB].
• The setting is fixed to [AWB] in the following cases.
– [Backlit Softness]/[Relaxing Tone]/[Distinct Scenery]/[Bright Blue Sky]/[Romantic Sunset
Glow]/[Vivid Sunset Glow]/[Glistening Water]/[Clear Nightscape]/[Cool Night Sky]/[Warm
Glowing Nightscape]/[Artistic Nightscape]/[Glittering Illuminations]/[Handheld Night Shot]/
[Clear Night Portrait]/[Appetizing Food]/[Cute Dessert] (Scene Guide Mode)
[]
You can set the colour temperature manually for
taking natural pictures in different lighting
conditions.
The colour of light is measured as a number in
degrees Kelvin. As the colour temperature
increases, the picture becomes more bluish. As the colour
temperature decreases, the picture becomes more reddish.
1 Press
3
2 Press 3/4 to select the colour temperature and then press
[MENU/SET].
•
You can set a colour temperature from [2500K] to [10000K].
Under fluorescent lighting, LED lighting fixture etc., the appropriate White Balance
will vary depending on the lighting type, so use [AWB] or [ ], [ ], [ ], [ ].
2 3
To Next Page
Loading...
