11. Using the Wi-Fi function
328
About Connections
If you have selected [New Connection], select a Wi-Fi function and destination first, and
then select a connection method.
If you have selected [Select a destination from History] or [Select a destination from
Favorite], you can connect with the same Wi-Fi connection settings as used previously.
This section describes connection methods.
•
When connecting with the same settings as used previously, refer to P332.
When a screen similar to the one below is displayed, select a connection method.
•
Example of operation for displaying a screen:
Performing a direct connection is convenient for when you are in a place away from home
where wireless access points are not available or for when connecting temporarily to a
device you do not usually use.
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] > [Send
Images While Recording] > [Smartphone]
Wireless access point
[Via Network] Connects via a wireless access point. P329
[Direct] Your device connects directly to this unit. P331
To Next Page
Loading...
