8. Stabiliser, Zoom and Flash
230
Taking pictures by using the flash
Applicable modes:
∫ Open/Close the built-in flash
Taking a picture using the flash becomes possible by opening
the built-in flash.
A To open the flash
Press the flash open button.
B To close the flash
Press the flash until it clicks.
•
Forcibly closing the flash can damage the camera.
• Be sure to close the built-in flash when not in use.
• The flash setting is fixed to [Œ] while the flash is closed.
• Be careful not to catch a finger when closing a flash bulb.
To Next Page
Loading...
