Panasonic LUMIX DMC-G7WSG Operating Instructions For Advanced Features

2. Getting Started/Basic Operations
36
Attaching/Removing the Lens
By changing the lens, you will increase your picture taking-options and further your
enjoyment of the camera. Change the lens using the following procedure.
•
Check that the camera is turned off.
• Change lenses where there is not a lot of dirt or dust. Refer to P403 when dirt or dust gets on
the lens.
1
Turn the lens rear cap A and the body cap B in the direction of the
arrow to detach them.
• Do not put your hands inside the mount.
2
Align the lens fitting marks C and then rotate the lens in the direction
of the arrow until it clicks.
• Do not press the lens release button D when you attach a lens.
• Do not try to attach the lens when holding it at an angle to the camera body as the lens
mount may get scratched.
• It is recommended to attach the lens cap or attach the MC Protector (optional) to protect the
lens surface when carrying. (P364)
Attaching the lens



Panasonic LUMIX DMC-G7WSG Specifications

General

Camera Type	Mirrorless
Sensor Type	Live MOS
Sensor Size	Four Thirds
Image Processor	Venus Engine
Lens Mount	Micro Four Thirds
Continuous Shooting	Up to 8 fps
Built-in Flash	Yes
Wireless Connectivity	Wi-Fi
Battery Life	Approx. 360 shots
Effective Pixels	16.0 MP
ISO Sensitivity	200-25600
Shutter Speed	1/4000 - 60 sec
Video Recording	4K at 30p
File Formats	JPEG, RAW, MP4
LCD Screen	3.0-inch, 1040000 dots, Vari-angle
Battery	DMW-BLC12
Dimensions	124.9 x 86.2 x 77.4 mm
Weight	410 g (body only)
Image Sensor Format	Micro Four Thirds
Viewfinder	2.36M-dot OLED