Panasonic LUMIX DMC-G80M - Monitor and Viewfinder Control; [LVF] Button for Switching Displays; Touch Screen Interaction

21
Preparation/Basic
(ENG) DVQX1015
Press [LVF] to switch between the Monitor and Viewfinder.
A [LVF] button
B Eye sensor
Press [LVF].
• The monitor/viewfinder will switch as follows:
¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the
focus as the eye sensor is activated. The camera does not beep when focus is achieved with
[Eye Sensor AF].
∫ Notes on automatic viewfinder/monitor switching
Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the
viewfinder automatically when you bring your eye or an object near it.
•
If you enable the automatic viewfinder/monitor switching function and display the “On-monitor
recording information screen” on the monitor, [Power Save LVF Shooting] in [Economy] can be
used, allowing you to reduce the battery consumption.
Touch screen of this unit is capacitive. Touch the panel directly with your bare finger.
∫ Touch
To touch and release the touch screen.
∫ Drag
A movement without releasing the touch screen.
[LVF] button (Switching the Monitor/Viewfinder)
Automatic viewfinder/
monitor switching
¢
Viewfinder display
¢
Monitor display
Touch screen (Touch operations)
ョㄏブ
Fn7
Fn6
Fn8
Fn9
SNAP
Fn10
DMC-G80MHBody&G81MHBody_EB-DVQX1015_mst.book 21 ページ ２０１６年７月２７日 水曜日 午後６時１８分