27
(ENG) VQT3E96
Taking a Still picture
The camera automatically sets the shutter speed and the aperture value according to the
brightness of the subject.
You can take pictures with greater freedom by changing various settings in [REC] Mode
menu.
•
Set the drive mode to [ ] by pressing 4().
Set [REC] Mode to [ ].
Taking Pictures with Your Favorite Settings (Program AE Mode)
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not achieved,
except when set to flash.)
• You will not be able to take a picture until the
focus is set, since the [FOCUS PRIORITY] is set
initially to [ON].
Press the shutter button fully (push it in
further), and take the picture.
• The access indication lights red when pictures are
being recorded on the card.
DMC-GF2PP-VQT3E96_eng.book 27 ページ ２０１０年１１月１８日 木曜日 午前９時５２分
To Next Page
Loading...
Need help?
General
