37
(ENG) VQT3E96
This section describes how to setup the menu items.
•
If you set [MENU RESUME] in the [CUSTOM] menu to [ON], the screen shows the last
selected menu item when the camera was turned off.
It is set to [ON] at the time of purchase.
Setting menu items
Press [MENU/SET].
Select the menu by pressing 3/4/2/1 or
by rotating the rear dial.
• Press [ ] to return to the recording screen.
• It can also be set by the touch operation.
Press [MENU/SET] to display the menu.
A Menu item
B Settings
Select the menu item by pressing 3/4 or
by rotating the rear dial.
• Select the item at the very bottom, and press 4 or
rotate the rear dial right to move to the next screen.
Press [MENU/SET] or the rear dial.
• Depending on the item, its setting may not appear or it
may be displayed in a different way.
• The figure on the right is an example of selecting
[I.DYNAMIC] in the Program AE Mode.
DMC-GF2PP-VQT3E96_eng.book 37 ページ ２０１０年１１月１８日 木曜日 午前９時５２分
To Next Page
Loading...
Need help?
General
