25
(ENG) VQT3E96
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
Turn the camera on.
• The status indicator 1 lights when you turn this unit on.
A [MENU/SET] button
Touch [CLOCK SET].
Touch the items you wish to set (Year/
Month/Day/Hours/Minutes), and set using
[3]/[4].
A: Time at the home area
B: Time at the travel destination
•
You can continue to switch the settings by continuously
touching [3]/[4].
• Touch [CANCEL] to cancel the date and time settings
without setting a date and time.
To set the display order and the
time display format.
•
Touch [STYLE] to display the settings screen for
setting display order/time display format.
• Touch [CANCEL] to return to the previous screen
without setting the display order/time display format.
Touch [SET] to set.
Touch [SET].
• After completing the clock settings, turn the camera off. Then turn the camera back on,
switch to Recording Mode, and check that the display reflects the settings that were
performed.
The clock can be setup with the following procedure at the time of purchase. Change
the clock setting in [CLOCK SET] of the [SETUP] menu.
For details, read the PDF.
DMC-GF2PP-VQT3E96_eng.book 25 ページ ２０１０年１１月１８日 木曜日 午前９時５２分
To Next Page
Loading...
Need help?
General
