VQT3E96 (ENG)
42
[REC] Mode: ²
Taking Picture by Setting the Exposure Manually
Determine the exposure by manually setting the aperture value and the shutter speed.
The Manual Exposure Assistance appears on the lower portion of the screen to indicate
the exposure.
Set [REC] Mode to [ ].
Rotate the rear dial to set the aperture and
shutter speed.
• It will switch between aperture setting operation and
shutter speed setting operation every time the rear
dial is pressed.
• Rotate the rear dial to display the [EXPO.METER].
• You can also set the focus manually by setting the [FOCUS MODE] to [MF].
Press the shutter button halfway.
A Manual Exposure Assistance
• Set the aperture value and the shutter speed again
when the exposure is not adequate.
∫ Manual Exposure Assistance
•
The manual exposure assistance is an approximation. We recommend checking the pictures
on the playback screen.
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
−
−
3
+
30
−
−
3
+
30
DMC-GF2PP-VQT3E96_eng.book 42 ページ ２０１０年１１月１８日 木曜日 午前９時５２分
To Next Page
Loading...
Need help?
General
