VQT4F91 (ENG)
22
Applicable modes:
Taking a Still picture
Select the Recording Mode.
Just by touching the subject to focus, it will focus on the subject and take the picture
automatically.
∫ To cancel the Touch Shutter function
Touch [ ].
Press the shutter button halfway to focus.
A Aperture value
B Shutter speed
• Aperture value and shutter speed are displayed. (It
will flash in red if the correct exposure is not achieved,
except when set to flash.)
• When the image is correctly focused, the picture
will be taken, since the [Focus Priority] is set
initially to [ON].
Press the shutter button fully (push it in
further), and take the picture.
Taking pictures using the Touch Shutter function
Touch [ ].
Touch [ ].
• Icon will change to [ ], and taking a picture with the
Touch Shutter function becomes possible.
Touch the subject you wish to focus on, and then take a picture.
• AF area with same function as [Ø] in AF mode is displayed at the position you touch, and
picture is taken when it is focused when the AF mode is set to [š], [ ], [ ] or [Ø].
VQT4F91~Body1_eng.fm 22 ページ ２０１２年４月２日 月曜日 午後３時３３分
To Next Page
Loading...
