VQT4F91 (ENG)
40
∫ Setup Menu
This menu lets you perform the clock settings, select the operating beep tone settings and
set other settings which make it easier for you to operate the camera.
[Touch Settings]
Enables/disables the Touch operation.
[Touch Scroll]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[Menu Resume]
Stores the location of the last-used menu item for each menu.
[Pixel Refresh]
It will perform optimization of imaging device and image
processing.
[Sensor Cleaning]
Dust reduction to blow off the debris and dust that have affixed
to the front of the imaging device is performed.
[Shoot w/o Lens]
Sets whether or not the shutter can be released when no lens
is attached to the main body.
[Clock Set]
Setting Date/Time.
[World Time]
Sets the times for the region where you live and your holiday
destination.
[Travel Date]
Departure date and return date of the travel as well as the
name of the travel destination can be set.
[Beep]
Set the volume of the focus confirmation beep, the self-timer
beep and the alarm beep.
[Volume]
Adjust the volume of the speaker to any of 7 levels.
[LCD Display]
Brightness, colour, or red or blue tint of the LCD monitor is
adjusted.
[LCD Mode]
The brightness of the LCD monitor can be adjusted depending
on how bright it is around the camera.
[Economy]
Suppresses the unit power consumption to prevent the battery
being run down.
[Auto Review]
Set the length of time that the picture is displayed after taking
the still picture.
[USB Mode]
Sets the communication method when connecting using the
USB connection cable (supplied).
[Output]
This sets how the unit connects to a television etc.
[VIERA Link]
Equipment that supports the VIERA Link will connect
automatically.
[3D Playback]
Setup the output method for 3D pictures.
DMC-GF5X&GF5K&GF5W&GF5EB-VQT4F91_eng.book 40 ページ ２０１２年３月１９日 月曜日 午後２時５７分
To Next Page
Loading...
