117
3. Recording Modes
This effect leaves one selected colour to emphasise
impressiveness.
∫ Set the colour to leave in
Set the colour to leave in by selecting a location on the screen.
1 Press [Fn1] to display the setting screen.
•
Setting screen can also be displayed by touching in order of [ ] then [ ].
2 Select the colour you want to leave by moving the
frame with 3/4/2/1.
•
You can also select the colour you want to leave by
touching the screen.
• Pressing [DISP.] will return the frame back to the centre.
3 Press [MENU/SET] to set.
•
Depending on the subject, the set colour may not be left in.
[One Point Color]
Items that can be set
Amount of colour
left
Small amount of
colour
Large amount of
colour
To Next Page
Loading...
