5. Focus and Brightness (Exposure) Settings
144
Applicable modes:
By setting [Touch AF] (P49) in [Touch Settings] of the [Custom] menu to [AF+AE], you can
optimise the focus and brightness for the position you have touched.
1
Select the menu. (P53)
2
Press 3/4 to select [AF+AE], and press [MENU/SET].
3
Touch the subject you want to optimise the
brightness for.
• AF area setting screen is displayed. (P142)
• The brightness optimisation position is displayed on the
centre of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [ ], which is used exclusively for the Touch AE.
• Touching [Reset] returns the brightness optimisation position and the AF area to the
centre.
4
Touch [Set].
• The AF area with the same function as [
Ø
] is displayed on the touched position.
• Touching [ ] returns [Metering Mode] to the original setting and cancels the
brightness optimisation position. The AF area setting is also cancelled.
• Touching [ ] returns [Metering Mode] to the original setting and cancels the
brightness optimisation position.
Optimising the focus and brightness for a touched position
> [Custom] > [Touch Settings] > [Touch AF]
When the background has become too bright, etc., the
brightness contrast with the background can be
adjusted by compensating the exposure.
MENU
To Next Page
Loading...
