141
5. Focus and Brightness (Exposure) Settings
Applicable modes:
When [š], [ ], [Ø], or [ ] in Auto Focus Mode is selected, you can change the
position and size of the AF area.
•
Perform the operation after cancelling the touch shutter function.
• When setting with touch operation, set [Touch AF] in [Touch Settings] of the [Custom] menu to
[AF].
• The spot metering target can also be moved to match the AF area when the [Metering Mode]
(P160) is set to [ ].
At the edge of the screen, the metering may be affected by the brightness around the AF area.
Not available in these cases:
•
When using digital zoom, the position and size of the AF area cannot be changed.
Setting up position of the AF area/changing size of the AF area
To Next Page
Loading...
