4. Picture Quality and Colour Tone Settings
124
¢ It will operate as [AWB] during motion picture recording.
3
Press [MENU/SET] to set.
• The White Balance is only calculated for subjects within the range of the camera’s flash. (P200)
• In Scene Guide Mode/Child Mode/Portrait Mode, changing the scene or Recording Mode will
return White Balance settings (including the White Balance fine adjustment setting) back to
[AWB].
• The setting is fixed to [AWB] in the following cases.
– [Backlit Softness]/[Relaxing Tone]/[Bright Blue Sky]/[Romantic Sunset Glow]/[Vivid Sunset
Glow]/[Glistening Water]/[Clear Nightscape]/[Cool Night Sky]/[Warm Glowing Nightscape]/
[Artistic Nightscape]/[Glittering Illuminations]/[Handheld Night Shot]/[Clear Night Portrait]/
[Appetizing Food]/[Cute Dessert] (Scene Guide Mode)
– Scenery Mode
[]
You can set the colour temperature manually for
taking natural pictures in different lighting
conditions.
The colour of light is measured as a number in
degrees Kelvin. As the colour temperature
increases, the picture becomes more bluish. As the colour
temperature decreases, the picture becomes more reddish.
1 Press
3
2 Press 3/4 to select the colour temperature and then press
[MENU/SET].
•
You can set a colour temperature from [2500K] to [10000K].
Under fluorescent lighting, LED lighting fixture etc., the appropriate White Balance
will vary depending on the lighting type, so use [AWB] or [ ], [ ].
2
To Next Page
Loading...
