5. Focus and Brightness (Exposure) Settings
134
• If you zoom in/out after focusing on a subject, the focus may lose its accuracy. In that case,
re-adjust the focus.
• When the Focus Mode is set to [AFF] or [AFC].
– A beep will be emitted when focus is first achieved during the pressing halfway.
– When AF Mode is set to [ ], the first AF area at which focus is achieved may be displayed
momentarily while pressing halfway.
Subjects and recording conditions which are difficult to focus
•
Fast-moving subjects, extremely bright subjects or subjects without contrast.
• When recording subjects through windows or near shiny objects.
• When it is dark or when jitter occurs.
• When the camera is too close to the subject or when taking a picture of both distant and near
subjects.
To Next Page
Loading...
