5. Focus and Brightness (Exposure) Settings
152
Setting the display method of the MF Assist (enlarged screen)
•
Available settings vary depending on the lens used.
Setting the initial magnification level of MF Assist
An initial MF Assist magnification level between 3 and 10 times can be set.
•
When [MF Assist Display] is set to [PIP], the display can be enlarged only up to 6 times
regardless of this setting.
• The magnification level from the last MF Assist session is saved as the initial magnification
level.
• These items can be set only when an interchangeable lens with no focus ring (H-FS12032) is
used.
Changing the control dial operation in Manual Focus
> [Custom] > [MF Assist]
When an interchangeable lens with no focus ring (H-FS12032) is used
[ON]
Focus can be adjusted when you press 2( ) and the screen that lets you set the
area to be enlarged is displayed.
[OFF]
Focus can be adjusted when you press 2( ). The screen that lets you set the area
to be enlarged is not displayed.
When an interchangeable lens having a focus ring (H-FS35100/H-PS14042) is used
[]
The screen is enlarged by operating the focus ring or the focus lever of the lens or by
pressing 2().
[]The screen is enlarged by operating the focus ring or the focus lever of the lens.
[]The screen is enlarged by pressing 2().
[OFF]
The screen cannot be enlarged by operating the focus ring or the focus lever of the
lens or by pressing 2().
> [Custom] > [Lens w/o Focus Ring] > [MF Magnification Level]
>
[Custom] > [Lens w/o Focus Ring] > [Control Dial (MF)]
[MAGLEVEL]: Rotating the control dial allows you to adjust the magnification level of
MF Assist
[FOCUS]: Rotating the control dial allows you to adjust the focus.
•
These items can be set only when an interchangeable lens with no focus ring (H-FS12032) is
used.
To Next Page
Loading...
