255
11. Using the Wi-Fi function
∫ Using a password to set up a connection
When [Wi-Fi Password] is set to [ON], you scan a QR code or manually enter a password to
set up a connection. Taking either of these steps will improve your security.
1 Press [Wi-Fi] on the camera.
2 Operate the smartphone.
•
The connection method differs according to your smartphone.
If you are using an Android device
1 Start “Image App”. (P253)
2 Select [Wi-Fi].
3 Select the SSID displayed on the screen of the camera.
•
The connection confirmation screen is displayed on the camera. Select [Yes]. (Only
when connecting for the first time)
Preparations
(On the camera)
•
Set [Wi-Fi Password] to [ON]. (P296)
(On your smartphone)
•
Install the “Image App” in advance. (P253)
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1 Start “Image App”. (P253)
2 Select [QR code], and then select [OK].
To Next Page
Loading...
