63
2. Getting Started/Basic Operations
• When [Silent Mode] is set to [ON], [Beep Volume] and [Shutter Vol.] is set to [OFF].
• When [Live View Mode] is set to [30fps] the image quality on the recording screen may be
worse than when it is set to [60fps], but this does not affect the recorded image.
• In a dark environment, the frame rate may become slower.
• When using the AC adaptor (optional), [Live View Mode] is fixed to [60fps].
• Some subjects may appear differently from actuality on the monitor. However, this does not
affect the recorded pictures.
[Beep]
This allows you to set the volume for electronic sound and the
electronic shutter sound.
[Beep Volume]:
[u] (High)
[t] (Low)
[s] (OFF)
[Shutter Vol.]:
[] (High)
[] (Low)
[] (OFF)
[Shutter Tone]:
[]/[]/[]
[Live View Mode]
Set the frame rate of the recording screen (Live View screen).
[30fps]: Reduces the power consumption, extending the
operating time.
[60fps]: Displays movements smoother.
[Monitor Display]
Brightness, colour, or red or blue tint of the Monitor is adjusted.
[] ([Brightness]):
Adjust the brightness.
[] ([Contrast]):
Adjust the contrast.
[] ([Saturation]):
Adjust the clarity of colours.
[] ([Red Tint]):
Adjust the red tint.
[] ([Blue Tint]):
Adjust the blue tint.
1 Select the settings by pressing 3/4, and adjust with
2/1.
•
Adjusting can also be performed by rotating the control dial.
2 Press [MENU/SET] to set.
3
To Next Page
Loading...
