36
Others
VQT5D49 (ENG)
• [Photo Style], [Sensitivity], [Metering Mode], [i.Dynamic], [i.Resolution] and [Digital Zoom] are
common to both the [Rec] menu and [Motion Picture] menu. Changing these settings in one of
these menus is reflected in other menu.
For details, refer to the explanation for the corresponding setting in the [Rec] menu.
[ISO Limit Set]
When the ISO sensitivity is set to [AUTO] or [ ], an optimal ISO
sensitivity is set with the selected value as an upper limit.
[ISO Increments] The ISO sensitivity settings values changes in steps of 1/3 EV or 1 EV.
[Extended ISO] ISO sensitivity can be set up to minimum [ISO125].
[Long Shtr NR]
You can eliminate the noise caused by recording with a slower shutter speed.
[Shading Comp.]
If the screen periphery darkens as a result of lens characteristics, the
brightness in this region will be corrected.
[Ex. Tele Conv.]
When the number of pixels is set to anything other than [L], the Tele
effect is increased without degradation in image quality.
[Digital Zoom]
Increases the Tele effect.
The higher the level of magnification, the greater the degradation in image quality.
[Color Space]
Set this when you want to correct the color reproduction of the recorded
pictures on a PC, printer etc.
[Stabilizer]
When camera shake is sensed during recording, the camera corrects it automatically.
[Face Recog.] Sets the focus and exposure automatically prioritizing registered faces.
[Profile Setup]
If you set the name and birthday of your baby or pet in advance, you can
record their name and age in months and years in the images.
[Motion Picture]
[Rec Format] Sets the file format for the motion pictures you record.
[Rec Quality] This sets up the picture quality of motion pictures.
[Exposure Mode]
Select the method for setting the aperture value and shutter speed in
Creative Video Mode.
[Picture Mode]
Sets the recording method for still pictures during motion picture recording.
[Continuous AF] Continues to focus on the subject for which focus has been achieved.
[Rec Highlight] White saturated areas appear blinking in black and white.
[Ex. Tele Conv.] Increases the Tele effect.
[Flkr Decrease]
The shutter speed can be fixed to reduce the flicker or striping in the motion picture.
[Silent Operation]
Enables touch operations to allow silent use while recording motion pictures.
[Mic Level Disp.] Set whether or not the mic levels are displayed on the screen.
[Mic Level Adj.] Adjust the sound input level to 4 different levels.
[Wind Cut]
Reduces the wind noise effectively if there is wind noise when recording sound.
DMC-GM1KP-VQT5D49_eng.book 36 ページ ２０１３年１０月４日 金曜日 午後２時５分
To Next Page
Loading...
Need help?
General
