65
Others
(ENG) SQT0775
• Are you trying to play back the motion pictures by directly inserting the card in the card slot of
the TV?
> Connect the camera to the TV with the AV cable (optional), or with the HDMI micro cable,
and then play back the motion pictures on the camera.
• Is it connected properly with the HDMI micro cable?
• Is the [VIERA Link] on this unit set to [ON]?
> If the input channel does not switch automatically, use the remote control for the TV to
switch it.
> Check the VIERA Link setting on the connected device.
> Turn this unit off and on.
> Set [HDAVI Control] to [Off] on the TV and then turn it back to [On].
(Refer to the operating instructions of the TV for details.)
• It is a sound of lens movement or aperture operation when this unit is turned on or off, and it is
not a malfunction.
• The sound, which is caused by the automatic adjustment of the aperture, is heard when the
brightness has changed due to, for example, zooming or the movement of the camera. This is
not a malfunction.
• The surface of the camera and the reverse side of the monitor may become warm during use.
This does not affect the performance or quality of the camera.
• If you do not use the camera for a long time, the clock may be reset.
> [Please set the clock] message will be displayed; please reset the clock. (P18)
The motion pictures cannot be played back on a TV.
VIERA Link does not work.
There is a sound from lens unit.
The camera becomes warm.
The clock is reset.
DMC-GX8_PP-SQT0775_eng.book 65 ページ ２０１５年７月７日 火曜日 午後５時１分
To Next Page
Loading...
Need help?
General
